The 24x40 etrailer Cargo Carrier for RV Bumper # e99050 requires a 4" x 4" or 4-1/2" x 4" square bumper in order to mount so it likely isn't going to work with your ProMaster's rear bumper. You'd need a hitch mounted carrier like the 24x60 etrailer Cargo Carrier for 2" Hitches # e98874 instead. If your 2023 ProMaster doesn't already have a hitch installed already then you'll also need the etrailer Trailer Hitch Receiver # e99AR. view full answer...
Hi Michelle; thanks for the question and there isn't a waterproof cargo bag that will fit perfectly in the 22" x 49" Flint Hill Goods Aluminum Cargo Carrier # FHG59ZR. The available waterproof cargo bag is the Curt Cargo Bag # C18211 which is 56" long x 22" wide x 21" tall.
That said, this bag will fit in the larger aluminum 22" x 60" Flint Hill Goods Cargo Carrier # FHG49ZR.
Otherwise, the best option for the 22" x 49" carrier # FHG59ZR is the water resistant 40" x 20" etrailer Cargo... view full answer...
When we installed the Curt Receiver # C38JR we measured the inside height of the receiver at 12" where the Draw-Tite Receiver # DT79GR measured at 11-1/2". The Adapter # C26FV you found is only rated for use with tow bars as it was not designed to support tongue weight more than the weight of the tow bar.
We do have the 20x48 Reese Cargo Carrier # 6502 which you can see raises the platform above the receiver shank which will give you a better height on the tray and decrease the chances... view full answer...
The only custom-fit bolt-on hitches for your 2024 Honda Civic Hatchback are Class I with a 1-1/4" receiver like the # C92UR. This is pretty common for a car like a Civic. If you really wanted a 2" receiver the only way to get it would be to take the # E17 to a fabricator and have them fashion a custom hitch for your vehicle. view full answer...
As long as your GearDeck is pre-2021 the Lets Go Aero Flat Pipe Spine w/ 2" Shank for Pre-2021 TwinTube Platform Cargo Carriers # H01373 will fit. view full answer...
No, it will not but I have one that does. It is the Stealth Hitches item # SH22MR. This hitch has been confirmed to fit the 2021 BMW X5 M model. It comes with everything you'll need to tow a trailer or haul an accessory like a bike rack or cargo carrier. view full answer...
The Stealth Hitches Hidden Rack item # 391KIATELL20 you ordered doesn't have a class rating because it is not capable of towing. It is only for accessories that fit 2" receivers like bike racks and cargo carriers. This 2" receiver has a 600 lbs tongue weight which is comparable to class III hitches.
If you want to tow with this hitch you'll need to add the Towing Kit w/ Ball Mount and Trailer Wiring for Stealth Hitches Hidden Rack Receiver - 2" Ball item # SH53GR. view full answer...
Yes, it can! I checked with Stealth Hitch and I can confirm that their Hidden Rack Receiver item # SH77VR does fit your 2017 BMW X1 M. This hitch is only capable of using accessories like bike racks or cargo carriers. If you plan on towing you'll need item # SH55VR view full answer...
Sorry but no! The only hitch available for the 2024 Mitsubishi Outlander ES is the 2" Curt item # C87WR you were looking at. If you are wanting to use 1-1/4" accessories with this hitch all you will need is the Trailer Hitch Reducer 2" to 1-1/4" Trailer Hitch Receiver item # e63YR. This inserts inside the 2" receiver and allows you to mount 1-1/4" accessories like bike racks and cargo carriers. It is not an adapter so you will not lose any tongue weight capacity or violate your accessories... view full answer...
A Champion 4650 generator should be 23.2" L x 17.7" W so the Viking Solutions Stack Rack II 2-Level Cargo Carrier # 310-VSR201 would be just shy (32-5/8" long x 17-5/8" wide) of fitting the width of the generator. A larger carrier like the 22x60 Flint Hill Goods Cargo Carrier # FHG49ZR (58-3/16" long x 20-1/2" wide) would be large enough to hold the generator and some gas cans. view full answer...
You are going to need to use a cargo carrier like the Curt # C18152 as we do not have any bike racks capable of carrying an e-tricycle. This cargo carrier fits into a 2" receiver so you need these on both your RV and your flat towed car. You may need to add Auxiliary Lights # C53201 depending on your tail lights and if the view is impaired when you load your e-tricycle. view full answer...
This might be a little confusing Krista but we do not carry everything you will need to carry your Catrike Recumbent trike. We do have the Hollywood Racks Sport Rider # HR1450Z which will fit into your 2" receiver on your 2023 Ford Transit. But you will also need to get the Sport Rider Trike Adapter TRK-ADP from Hollywood Racks to be able to carry your trike. This adapter allows you to carry trikes with a track width up to 32". They do have other adapters as well if you are also wanting... view full answer...
Tyler, yes, the Thule Motion XT Rooftop Cargo Box # TH629706 will work just fine with your OEM roof rack on your 2019 Toyota Highlander. view full answer...
Thank you for the pictures of your Thule cargo box Alvaro, based on seeing that yes the part # TH05738 that you referenced is the correct fit. view full answer...
The CargoSmart Soft-Sided Car Top Carrier # CS44FR uses straps that need to be wrapped around some kind of crossbar or rail, but we have an alternative with the Rightline Gear Sport Jr. Rooftop Cargo Bag # RL100S50 that has the same 10 cu ft carrying capacity, but it uses straps that have clips on them to fit in your door jambs instead of straps with loops like what we see with the CargoSmart bag you were looking at.
I've attached some review videos you can reference to see the differences... view full answer...
Absolutely, Henry; the Thule Force XT XXL Rooftop Cargo Box # TH6359B has been tested and works beautifully with the Thule TracRac.
As long as the TracRac you've got is actually made by Thule, I.e It's got their branding on it then this box will work fine. If not, then the bars will be too large and the box won't fit. view full answer...
No, I am sorry there is not. All of our light kits like the item # 20174 or item # C53201 use a 4-way connector. The 4-way connectors like item # C89KR, you were looking at, that fits your 2024 Kia Seltos do not have the ability to power a reverse light. view full answer...
We don't currently offer any hitch mounted spare tire carriers with a swing-away function, but you could get a swing-away adapter like the Yakima BackSwing Swing Away Hitch Extender for Bike Racks # Y02483. This would mount in your Q7's 2" trailer hitch and allow you to mount the # e98ZR into the 2" receiver tube opening. Since this is an adapter it will reduce the hitch's capacity by 50% so you'll want verify the weight of the wheel/tire along with the weight of the carrier (35lbs) to... view full answer...
Hey Erman, for a wheelchair carrier I recommend checking out the Flint Hill Goods 30" x 50" Wheelchair Carrier # FHG77ZR. This wheelchair carrier will simply slide into any 2" trailer hitch, has a 48" long loading ramp, and has a nice 500 lb capacity.
If you don't already, you're going to need to add a hitch with the Draw-Tite Max-E-Loader Trailer Hitch Receiver # 41116 which is custom fit to your vehicle. view full answer...
We do!
What you're looking for is the etrailer Hitch Mounted Spare Tire Carrier # e98ZR which fits a 2" hitch receiver and has the upright positioned 6-1/4" away from the center of the hitch pin hole.
Attached is a review video for your reference. view full answer...
Go To Results